Deviser continues to respond to customers’ greatest needs with wireless test and measurement products that are simple, scalable and reduce OPEX.
Deviser Instruments’ SignalPROFILER E7042B and E7062B products address these challenges by combining multiple functionalities into single instruments.
SignalPROFILER Spectrum & Cable Analyser Specs
The E7042B (4GHz) and E7062B (6GHz) can be configured to meet customers’ test needs at the time of purchase or later as test needs evolve. Additional measurement capabilities can be added in the field, on the fly.
Key measurements include:
- Distance-to-Fault (DTF) identifies the fault location of impairments within the cell-site transmission cable system. Fault location impairments and discontinuities can be detected by either DTF-Return Loss or DTF-VSWR measurements.
- Interference Analysis can detect signal as low as -158 dBm and supports dual spectrogram display, RSSI, signal strength and signal ID capabilities.
- Fiber Inspection eliminates the most common fiber link problems by verifying that fiber optic connectors are not contaminated, letting customers quickly inspect and clean connector connections with a clear pass/fail indication.
- RF/Optical Power Meter displays either RF/Optical power level. Configurable settings include display range, maximum and minimum limits and power units in either dBm or Watts. Customers can set minimum and maximum power limits to automatically indicate pass/fail status.
- Cellular Signal Analysis provides detailed insight to LTE-FDD, LTE-TDD, WCDMA/HSDPA, TD-SCDMA, CDMA/EV-DO, GSM/GPRS/EDGE signals and modulation
